SH103B Automatic grease trace moisture meter
SH103B automatic grease trace moisture tester conforms to the
standard requirements of GB/T 7600, GB/T 6283, SH/T 0246, SH/T 0255
and other methods.
The Karl-Fischer (Coulomb) method was used to determine the content
of trace moisture in liquids with different properties.
It has the advantages of high precision, fast speed, stable and
reliable measurement data, etc. It is widely used in petroleum,
chemical, electric power, environmental protection, medicine and
other departments.
It can quickly determine the moisture content of alcohols, oils,
lipids, ethers, esters, acids, alkanes, benzene, amines, organic
solvents, pesticides, phenols, drug raw materials and other
chemical, petroleum, pharmaceutical, pesticide and other products.
Fully Automatic Transformer Oil Trace Water Moisture Measurement
Content Meter
Functional features:
Using 64 - bit embedded microprocessor as the main control core,
embedded in the mini-operating system
Constant current detection, high precision, fast measurement speed,
with background compensation function, stable and reliable
Double circuit balanced titration, the test result error is
smaller, the sensitivity is higher
The electrolytic cell adopts the most water seal design, the
balance time is short, the electrolyte use time is longer
The main machine has the function of automatic discharge and liquid
filling, which greatly improves the working environment
Real-time electrolytic diagram to observe reagent state at any time
Large screen touch LCD display, simple operation, friendly
interface
Full numeric keyboard, support 6 calculation formula, data
calculation is convenient and fast
Built-in large capacity storage, more convenient to record and
query measurement datal
Technical parameters
| Titration method | Electrometric titration |
| Electrolytic current | 0～400mA |
| Measuring range | 3μg～100mg() |
| Distinguish rate | 0.1μg |
| Fine degree | 3μg±20%,10μg±10%,100μg±5%,100μg以上±0.5%(No injection error is
included) |
| Display mode | Chinese liquid crystal display |
| Printer | Thermosensitive type, 36 characters, Chinese output |
| Environment temperature | 5℃～40℃ |
| Power supply voltage | 220V±10% 50Hz±10% |
| Power consumption | <40W |
| Overall dimensions | 300mm×290mm×200mm |
| Heavy volume | 3.7kg |
Packing list
| S/N | Name | Quantity | Unit | Remarks |
| Host | 1 | set | |
| Electrolyte | 1 | bottle | 500ml |
| Electrolytic cell | 1 | piece | |
| Stirrer | 1 | piece | |
| Silicone pad | 10 | piece | |
| Discolored silica gel | 1 | piece | |
| Vacuum grease | 1 | piece | |
| 1ml injector | 1 | piece | |
| 25ul micro injector | 1 | piece | |
| Closed needle | 1 | piece | |
| power cord | 1 | piece | |
| Instructions | 1 | copy | |
| Certificate warranty card | 1 | copy | |
