SH0085B antifreeze corrosion tester is designed and manufactured in
accordance with the requirements of the petrochemical industry
standard of the People's Republic of China, SH/T0085 Engine Coolant
Corrosion Test Method. It is suitable for measuring the corrosion
degree of high boiling point and low boiling point engine coolant
and its concentrate on typical metal test pieces according to the
test method of SH/T0085 ASTMD1384 standard. After the upgrade of
SH0085 corrosion tester, the instrument is equipped with a silent
air compressor, There is no need to manually equip the air source.
The SH0085B engine coolant corrosion tester is upgraded from the
original one. It can observe the experimental state while doing the
experiment. At the same time, the heating method uses an electric
heating plate to heat without adding medium.
ASTM D 1384 Engine Coolant Corrosion Tester With 3 Holes
Main technical specifications and parameters
| Heating method | electric plate heating
|
| Beaker | made of heat-resistant glass. High-type mouthless 1000ml,
conforming to SH/T0085 standard
|
| Gas diffusion pipe | the diffusion head is made of sand-cored glass, and the pipe
diameter is made of heat-resistant glass.
|
| Reflux condensate pipe | water-cooled type, with the length of sleeve not less than 400mm.
|
| Temperature control range | room temperature+100 ℃ ± 0.1 ℃
|
| Air flow meter: flow range | 30~300ml/min
|
| Timer | timing range 0~9999 h
|
| Number of test holes | 3 |
| Working power supply | AC220V ± 10%, 50Hz.
|
| Ambient temperature | - 10 ℃~+35 ℃. |
| Relative humidity | ≤ 85%. |
| Power consumption of the whole machine | no more than 2000W. |
Instrument size: 550 * 370 * 480mm Weight: 28kg
|
Package size: 620 * 420 * 450mm Weight: 34kg
|
Test piece size and material:
SH/T0085 Engine Coolant Corrosion Test Method (Glassware Method)
Group Test Piece
50x20x2mm (20 # steel, brass sheet, red copper sheet)
50x25x3.5mm (cast aluminum sheet, solder sheet, cast iron sheet)
Single center hole: φ 7.0mm
Supporting products:
Brass washer, insulating washer, steel washer, insulating sleeve,
brass bracket
Instrument size: length 35 * width 37 * height 48cm Weight: 28kg
Packing list
| S/N | Name | Quantity | Unit | Remarks |
| 1 | Host | 1 | set | |
| 2 | Power cord | 1 | piece | |
| 3 | Corrosion test piece | 3 | group | |
| 4 | Condenser tube | 3 | group | |
| 5 | Gas diffusion tube | 3 | group | |
| 6 | Fuse tube | 1 | piece | |
| 7 | Instruction | 1 | Copy | |
| 8 | Certificate warranty card | 1 | copy | |
Company Introduction
Shandong Shengtai Instruments Co., Ltd. is specialized in the
research and production of experimental testing instruments and
industrial testing instruments. It is a professional instrument
company integrating instrument research and development,
manufacturing, sales and service. Its products are widely used in
food, flour, grain and oil, Feed, electricity, petrochemical,
industrial oil, aerospace, coal quality and other industries.
For more than 10 years, Shengtai has always been adhering to the
"first-class service, customer first" as the purpose, "reasonable
price, honesty and trustworthiness" as the business policy. Adhere
to technical innovation, with rich knowledge of the technical team
and experienced, thoughtful after-sales service team.
Shengtai instrument as one of the most large-scale and competitive
enterprises in the industry, with the strength of technology
research and development, professional technical knowledge and
innovative design concept, in the model improvement, Significant
technical breakthrough has been achieved in the development of
function expansion and intelligent control system.
OUR service
After-sales service commitment, our company to sell the product
after-sales service commitment: warranty period of one year,
long-term technical support outside the warranty period. During the
warranty period, the seller shall bear the cost of the replacement
of the equipment, the freight and maintenance of the instrument;
outside the warranty period, the seller shall waive the maintenance
fee and charge only the cost of the basic materials and freight
charges when the instrument is malfunctioning and the seller shall
not charge the maintenance fee during the warranty period.
Packaging & Delivery
1. Out packing: Standard export wooden case.
2. Inner packing: With careful stretch film wrap product, hard wood
board+ strong bandage to fix corners.
3. Checking teams: Specialized staff to inspect and classified your
goods.
4.Port Any port of China
Lead Time :
| Quantity(Sets) | 1 - 1 | 2 - 5 | 6 - 10 | >10 |
| Est. Time(days) | 6 | 20 | 30 | To be negotiated |
Contact us
Shandong Shengtai Instrument Co.,ltd
ADD:6-8 time base NO.15 lanxiang road tianqiao Area Jinan city
TEL:+86 0531-85919987 85929987
FAX:+86 0531-85957987
Whatsapp/facebook:+86 13370527859
QQ:3206156217
Email:3206156217@qq.com
Web:www.labtool.net/en
