ST-60Moisture Analyzer with halogen heating, intelligent operation.
Quickly drying the sample evenly to obtain accurate moisture
determination results of ground water clear determination to
achieve visual information display, simple, easy to operate
instrument. Water samples stored in a variety of pre-determination,
makes testing quick and easy. And improved several times compared
to mechanical efficiency and accuracy of measurements. Standard
interface with computers and other peripherals connected.
0.001g/1mg/5mg/10mg Digital Halogen Grain Corn Seeds Analysis
Moisture Analyzer
110g 0.01g 0.005g 0.001g 0.002g Digital Halogen Moisture Analyzer
Ma-50-5 Digital 0.005g Rapid Halogen Heating Grain Dry Fruit
Moisture Analyzer
characteristic
1. It can be used after unpacking without installation and
commissioning;
2. No training is required, the operation is simple, and cumbersome
use steps are saved;
3. Short measuring time and high working efficiency;
4. Uniform heating, stable performance and accurate testing;
5. Small size and light weight;
6. Full-automatic measurement, alarm reminder after measurement, no
need to watch the measurement process;
7. It is widely used and almost suitable for moisture determination
in all industries;
8. The sensor imported from Germany makes the instrument test more
excellent and accurate;
9. The unique windshield design makes the instrument weighing
system more stable;
10. The water content and solid content of the sample can be
converted at the same time;
11. The heating chamber adopts pure stainless steel chamber cover,
which is high temperature resistant and easy to clean.
working principle:
The traditional moisture determination method is generally oven
drying method. The test of a sample takes two or three or even
three or four hours, and the moisture value (moisture content) of
the sample can be obtained only after weighing and manual
calculation by a balance. The low efficiency of moisture
determination by oven method can not meet the needs of high-tempo
enterprise production. ST series rapid moisture tester is a
high-efficiency moisture tester developed. It uses a
high-efficiency drying heater - high-quality annular halogen lamp
to heat the sample quickly and evenly, and the moisture of the
sample is continuously dried. During the whole measurement process,
the instrument automatically displays the measurement results in
real time: sample weight, water content, solid content, measurement
time, heating temperature, etc.
characteristic
1. Halogen lamp heating
2. Stainless steel heating chamber
3. Adjustable temperature/time
4. Percentage display of moisture content
5. Percentage display of drying allowance
6. Large LCD screen with backlight
7. Can remember multiple drying processes
Technical parameter
| Model | ST-60 | ST-80 | ST-100 |
| Maximum weighing (g) | 110 | 110 | 110 |
| Reading accuracy (g) | 0.005 | 0.001 | 0.0001 |
| Moisture measurement error | 0.2% | 0.1% | 0.05% |
| Service temperature | 5°C---35°C |
| Display | LCD |
| Calibration method | External calibration |
| Pan size(mm) | Φ90 |
| Dimensions(W*L*H) | 200*180*380 |
| Weight(Kg) | 5.8 |
| Heating mode | Halogen lamp |
| Temperature sensor | PT-100 |
| temperature range | 40°C---199°C |
| Temperature interva | 1°C |
| Moisture range | 0.00%---100% |
| Moisture readability | 0.01% |
| Dry residual range | 100.00%---0.00% |
| Dry residual readability | 0.01% |
| ATRO | 100%---999% |
| ATRO | 0%---999% |
| Temperature setting | 40°C---199°Cby1°Cstep |
| Time setting | 1---99min by 1s step |
| Automatic stop | 0.1%---9.9%within 1 min |
| Save History | 15 |
| Heating part | 220V+15%50Hz 400W |
| Connecting part | R232 Interface |
| Balance part | External power supply
Output: 9V Lnput: 220V+15%50Hz |
packing list
| S/N | Name | Quantity | Unit | Remarks |
| 1 | Host | 1 | set | |
| 2 | Sample tray | 5 | piece | |
| 3 | Power cord | 1 | piece | |
| 4 | Fuse tube | 1 | piece | 10A in the safety seat |
| 5 | instruction manual | 1 | copy | |
| 6 | Certificate warranty card | 1 | COPY | |
Company Introduction
Shandong Shengtai Instruments Co., Ltd. is specialized in the
research and production of experimental testing instruments and
industrial testing instruments. It is a professional instrument
company integrating instrument research and development,
manufacturing, sales and service. Its products are widely used in
food, flour, grain and oil, Feed, electricity, petrochemical,
industrial oil, aerospace, coal quality and other industries.
For more than 10 years, Shengtai has always been adhering to the
"first-class service, customer first" as the purpose, "reasonable
price, honesty and trustworthiness" as the business policy. Adhere
to technical innovation, with rich knowledge of the technical team
and experienced, thoughtful after-sales service team.
Shengtai instrument as one of the most large-scale and competitive
enterprises in the industry, with the strength of technology
research and development, professional technical knowledge and
innovative design concept, in the model improvement, Significant
technical breakthrough has been achieved in the development of
function expansion and intelligent control system.
OUR service
After-sales service commitment, our company to sell the product
after-sales service commitment: warranty period of one year,
long-term technical support outside the warranty period. During the
warranty period, the seller shall bear the cost of the replacement
of the equipment, the freight and maintenance of the instrument;
outside the warranty period, the seller shall waive the maintenance
fee and charge only the cost of the basic materials and freight
charges when the instrument is malfunctioning and the seller shall
not charge the maintenance fee during the warranty period.
Packaging & Delivery
1. Out packing: Standard export wooden case.
2. Inner packing: With careful stretch film wrap product, hard wood
board+ strong bandage to fix corners.
3. Checking teams: Specialized staff to inspect and classified your
goods.
4.Port Any port of China
Lead Time :
| Quantity(Sets) | 1 - 1 | 2 - 5 | 6 - 10 | >10 |
| Est. Time(days) | 6 | 20 | 30 | To be negotiated |
Contact us
Shandong Shengtai Instrument Co.,ltd
ADD:6-8 time base NO.15 lanxiang road tianqiao Area Jinan city
TEL:+86 0531-85919987 85929987
FAX:+86 0531-85957987
Whatsapp/facebook:+86 13370527859
QQ:3206156217
Email:3206156217@qq.com
Web:www.labtool.net/en
