SH103A automatic trace moisture measuring instrument introduction
High sensitivity, high precision, high reproducibility, Chinese
menu and prompt, simple and intuitive operation, low power
consumption and energy saving design, suitable for petroleum,
chemical, electric power, pharmaceutical and other fields, can be
tested sample type: solid, liquid, gas.
This instrument adopts the Karl Fischer Coulomb titration method,
which can reliably determine trace moisture in liquid, gas, and
solid samples. During testing, for solids that are insoluble in
reagents and substances that are prone to contaminating electrodes
and reagent reactions, corresponding solid, gas, and liquid
samplers can be used for indirect determination. It is an efficient
and fully automated analytical instrument. Widely used in
industries such as power, petroleum, chemical, pharmaceutical,
railway, environmental protection, and scientific research
institutions.
The relative molecular energy of water is much smaller than that of
oil. After gasification, the volume increases sharply, causing an
increase in system pressure drop and power consumption. Therefore,
the high content of oil can cause fluctuations in device operation
and cause tower flushing. And the inorganic salts (Call2, MgCl2)
brought in by water can also exacerbate the corrosion of the device
| Compliant with standards | GB/T7600 GB/T11133 |
| Test sample | Petroleum and chemical products |
| detection result | Determine the moisture content of various lubricating oils and
other petroleum products |
| Product model | SH103A |
Automatic Trace Moisture Meter Karl Fischer Moisture Meter
Fully Automatic Transformer Oil Trace Water Moisture Measurement
Content Meter
Automatic Trace Moisture Meter Karl Fischer Moisture Tester
Automatic Karl Fischer Titrator /Trace Moisture Meter
Automatic Trace Moisture Tester SH103A
Automatic Transformer Oil Moisture Tester
Istrument characteristics
1, 128×64 dot matrix LCD screen, Chinese prompt operation,
intuitive and friendly
2, the use of electrolyte blank current compensation, electrolyte
balance point drift compensation to correct the measurement results
3, large electrolytic current, can quickly reach the balance point,
into the test state
4. With the function of calendar clock, the storage time of power
down is 10 years
5, one-button operation, save time, improve work efficiency
Main technical indicators:
| Measurement accuracy | the test water amount between 10ug ~ 1000ug,the error is less than
3ug the test water is less than 1000ug, and the error is less than 0.3% |
| Measuring range | 0. 0001% to 100%, according to PPM, from 0.1ppm to 1 million ppm |
| Resolution ration | 0.1ug |
| Faradaic current | 0-400mA |
Outline dimension:270x210x125mm weight:8kg
|
1ppm=0.0001%
Meet the following standards:
1, GB/T7600 "in operation transformer oil moisture content
determination method (coulomb method)"
2, GB6283 "chemical products in the determination of moisture
content Karl Fischer method (general method)"
3, SH/T0246 "determination of water content in light petroleum
products (electric quantity method)"
4, SH/T0255 "additives and lubricating oil containing additives
moisture determination method (electric quantity method)"
5, GB/T11133 "Determination of water content in liquid petroleum
products (Karl Fischer method)"
6, GB/T7380 "surfactant water content determination (Karl Fischer
method)"
7, GB10670 "industrial fluoromethane in the determination of trace
moisture in the Karl Fischer method"
GB/T606 General method for determination of moisture in chemical
reagents Karl Fischer method
9, GB/T8350 "denatured fuel ethanol"
10, GB/T8351 "automotive ethanol gasoline"
11, GB/T3776.1 "pesticide emulsifier moisture determination method"
12, GB/T6023 Determination of trace moisture in butadiene for
industrial use - Karl Fischer Coulomb method
13, GB/T3727 Industrial ethylene, propylene determination of trace
water
GB/T7376 Determination of trace moisture in fluoroalkanes for
industrial use
GB/T18619.1 Determination of water content in natural gas -- Karl
Fischer - Coulomb method
16, GB/T512 "grease moisture determination method"
17, GB/T1600 -- Determination of pesticide moisture
18, GB/T11146 "crude oil water content determination method (Karl
Fischer coulomb method)"
19, GB/T12717 "industrial acetate test method"
GB/T5074 Coking products -- Determination of moisture
1,1, 2-tetrafluoroethane (HFC-134a) for industrial use
Moisture meter list
| S/N | Name | Quantity | Unit | Remarks |
| Host | 1 | set | |
| Electrolyte | 1 | bottle | 500ml |
| Electrolytic cell | 1 | piece | |
| Stirrer | 1 | piece | |
| Silicone pad | 10 | piece | |
| Discolored silica gel | 1 | piece | |
| Vacuum grease | 1 | piece | |
| 1ml injector | 1 | piece | |
| 25ul micro injector | 1 | piece | |
| Closed needle | 1 | piece | |
| power cord | 1 | piece | |
| Instructions | 1 | copy | |
| Certificate warranty card | 1 | copy | |
Company Introduction
Shandong Shengtai Instruments Co., Ltd. is specialized in the
research and production of experimental testing instruments and
industrial testing instruments. It is a professional instrument
company integrating instrument research and development,
manufacturing, sales and service. Its products are widely used in
food, flour, grain and oil, Feed, electricity, petrochemical,
industrial oil, aerospace, coal quality and other industries.
For more than 10 years, Shengtai has always been adhering to the
"first-class service, customer first" as the purpose, "reasonable
price, honesty and trustworthiness" as the business policy. Adhere
to technical innovation, with rich knowledge of the technical team
and experienced, thoughtful after-sales service team.
Shengtai instrument as one of the most large-scale and competitive
enterprises in the industry, with the strength of technology
research and development, professional technical knowledge and
innovative design concept, in the model improvement, Significant
technical breakthrough has been achieved in the development of
function expansion and intelligent control system.
OUR service
After-sales service commitment, our company to sell the product
after-sales service commitment: warranty period of one year,
long-term technical support outside the warranty period. During the
warranty period, the seller shall bear the cost of the replacement
of the equipment, the freight and maintenance of the instrument;
outside the warranty period, the seller shall waive the maintenance
fee and charge only the cost of the basic materials and freight
charges when the instrument is malfunctioning and the seller shall
not charge the maintenance fee during the warranty period.
Packaging & Delivery
1. Out packing: Standard export wooden case.
2. Inner packing: With careful stretch film wrap product, hard wood
board+ strong bandage to fix corners.
3. Checking teams: Specialized staff to inspect and classified your
goods.
4.Port Any port of China
Lead Time :
| Quantity(Sets) | 1 - 1 | 2 - 5 | 6 - 10 | >10 |
| Est. Time(days) | 6 | 20 | 30 | To be negotiated |
Contact us
Shandong Shengtai Instrument Co.,ltd
ADD:6-8 time base NO.15 lanxiang road tianqiao Area Jinan city
TEL:+86 0531-85919987 85929987
FAX:+86 0531-85957987
Whatsapp/facebook:+86 13370527859
QQ:3206156217
Email:3206156217@qq.com
Web:www.labtool.net/en
