Automatic Freezing Point, Pour Point Cold Filter Point Measuring
Instrument With Single Hole Compressor Refrigeration
SH0248CQ of solidifying point, pour point and cold filtration point
tester is based on the national standard GB/T510 "solidifying point
measurement of oil products and SH/T 0248 and GB/T3535 as the
basis, adopt modern advanced technology, mechanical, optical,
electronic and computer technology into an organic whole, can be
done automatically condensation point, pour point and cold
filtration point of petroleum products testing, the instrument
adopts photoelectric detection technology, automatic inclined glass
tube method, imported compressor refrigeration system to ensure
that meet the requirements of refrigeration and depth.
meet the standards: GB/T510, SH/T 0248, GB/T3535
1. Upgraded to 7-inch TFT color LCD display;
2. Refrigeration mode: fully enclosed and efficient refrigeration
compressor.
3. Cold trap for test: 2.
4. Detection method: spectral detection
5. After upgrade, 199 groups of historical data can be stored for
easy query.
6, standard micro printer automatic measurement automatic thermal
printing (standard)
7. After the completion of the test, if there is no personnel to
operate, set the automatic closing time of the refrigerator within
0-50min to avoid frequent opening of the compressor and prolong the
service life of the instrument.
8, test interval: cold filter point 1℃ freezing point 2℃.
9, temperature sensor: imported PT 100 probe
10, refrigeration medium: metal bath
11. Data can be equipped with U disk output to PC for long-term
data storage.
★12, with date password setting function.
13, standard micro printer automatic measurement automatic thermal
printing
★14, with TCP network transmission function
★15, can be uploaded and connected to LIMIS system
With laser printer interface, can be connected to HP printer, print
A4 original experiment report (optional)
Technical parameters:
Meet the standards: GB/T510, SH/T 0248, GB/T3535
Temperature measurement range: -70 ~ 50℃;
Pressure measurement range: 0 ~ 200.0 kPa;
Resolution 1 pa
Number of test samples: 2 routes
Temperature measuring element: PT100
Refrigeration mode: compressor refrigeration
Cooling method: air cooling
Printing: dot matrix printing of 20 Chinese characters
Display: 128×64 Chinese characters display
Storage: 199 sets of historical data can be stored for easy query;
Result output: at the same time can be equipped with U disk output
function, output to the PC for long-term storage
Output format: The output format of the result USB flash disk is
CSV or EXCEL.
★ Data extension: laser printer interface, can be linked to HP1108
laser printer (optional).
★ Data protection: with date password setting function.
Standard printing: standard micro printer automatic measurement
automatic thermal printing
★ Remote upgrade: with TCP network transmission function, can be
later software remote upgrade
★ Data management: can be connected to LIMIS system
★ Data memory: microcomputer instrument memory can be expanded to
16G.
| Model | SH0248CQ of solidifying point, pour point and cold filtration point
tester |
| Applicable standards | GB/T510, SH/T 0248 , GB/T3535 |
| Temperature measurement range | -70 ~ 50℃ |
| Pressure measurement range | 0 ~ 200.0 kPa; |
| Number of test samples | 2 |
| Temperature measuring element | PT100 |
| Cooling method | air cooling |
| Refrigeration mode | compressor refrigeration |
| Printing | dot matrix printing of 20 Chinese characters |
| Display | 128×64 Chinese characters display |
| Storage mode | 199 sets of historical data can be stored for easy query; |
| Results output | at the same time can be equipped with U disk output function,
output to the PC for long-term storage |
| Data extension | laser printer interface, can be linked to HP1108 laser printer
(optional). |
| Output format | The output format of the result USB flash disk is CSV or EXCEL. |
| Standard printing | standard micro printer automatic measurement automatic thermal
printing |
| Data protection | with date password setting function.
|
| Remote upgrade | with TCP network transmission function, can be later software
remote upgrade
|
| Data management | can be connected to LIMIS system
|
| Data memory | microcomputer instrument memory can be expanded to 16G. |
packing list
| S/N | Name | Unit | Quantity | Remarks |
| 1 | Automatic cold filter point tester | set | 1 | |
| 2 | Cold filtration point suction filtration device | set | 1 | |
| 3 | Cold filter point test tube | piece | 2 | |
| 4 | Pipette | piece | 2 | |
| 5 | Suction head assembly | set | 1 | Brass housing, nut, strainer, etc |
| 6 | Pour point test tube | piece | 2 | |
| 7 | Pour point sensor | set | 1 | |
| 8 | Freezing point test tube | set | 2 | |
| 9 | Condensation point sensor | set | 1 | |
| 10 | Plastic tie | piece | some | Length and width: 100mm x2mm |
| 11 | Silicone tube left and right | piece | 2 | |
| 12 | Fuse | piece | 2 | |
| 13 | Power cord | piece | 1 | |
| 14 | Instruction | copy | 1 | |
| 15 | packing list | copy | 1 | |
| 16 | Certificate warranty card | copy | 1 | |
Company Introduction
Shandong Shengtai Instruments Co., Ltd. is specialized in the
research and production of experimental testing instruments and
industrial testing instruments. It is a professional instrument
company integrating instrument research and development,
manufacturing, sales and service. Its products are widely used in
food, flour, grain and oil, Feed, electricity, petrochemical,
industrial oil, aerospace, coal quality and other industries.
For more than 10 years, Shengtai has always been adhering to the
"first-class service, customer first" as the purpose, "reasonable
price, honesty and trustworthiness" as the business policy. Adhere
to technical innovation, with rich knowledge of the technical team
and experienced, thoughtful after-sales service team.
Shengtai instrument as one of the most large-scale and competitive
enterprises in the industry, with the strength of technology
research and development, professional technical knowledge and
innovative design concept, in the model improvement, Significant
technical breakthrough has been achieved in the development of
function expansion and intelligent control system.
OUR service
After-sales service commitment, our company to sell the product
after-sales service commitment: warranty period of one year,
long-term technical support outside the warranty period. During the
warranty period, the seller shall bear the cost of the replacement
of the equipment, the freight and maintenance of the instrument;
outside the warranty period, the seller shall waive the maintenance
fee and charge only the cost of the basic materials and freight
charges when the instrument is malfunctioning and the seller shall
not charge the maintenance fee during the warranty period.
Contact us
Shandong Shengtai Instrument Co.,ltd
ADD:6-8 time base NO.15 lanxiang road tianqiao Area jinan city
TEL:+86 0531-85919987 85929987
FAX:+86 0531-85957987
Whatsapp/facebook:+86 13370527859
QQ:3206156217
Email:3206156217@qq.com
Web:www.labtool.net/en
